Defesa digital: repositório de publicações de Defesa ibero-americanas

Español
Português

Está en:  › Datos de registro

Analysis of External Ballistics for a Projectile of Caliber 155 MM

Identificadores del recurso

https://revistas.rcaap.pt/proelium/article/view/11926

Procedencia

(Proelium)

Ficha

Título:: Analysis of External Ballistics for a Projectile of Caliber 155 MM
Tema:: Projectile; angle of attack; stability; semispherical profile; center of gravity
Descripción:: The objective of this thesis is to propose a geometry for a projectile to firefighting. The finite volume code STAR − CCM+® is used to calculate forces and moments acting on the projectile and a code is created in MATHEMATICA® to define the characteristics of the trajectory. The PRODAS® is used to verify and validate the models implemented. Initially, the procedure adopted was to create an entire methodology for an existing ammunition that would allow be verified and validated with the available literature. An extensive aerodynamic characterization has been done through CFD in order to establish the projectile forces and moments behavior and thus feed the further 6 DOF computation. It was concluded that the locking strap, the guiding strap and the Coriolis drift were negligible compared to the results obtained. The implementation of angle of attack came to influence the range and stability of the projectile. In the following phase six different geometries were tested, varying the lenght and the nose. Set up for this projectile an initial velocity of 100 m/s, 10 kg, concluding that the total length would be 697.1 mm and semispherical profile with the capacity to transport 7.5 dm3 inside. Wind tests were conducted to evaluate the stability in flight, and the software and analysis process developed in this work are available, being a contribution to the project FIREND.
Fuente:: PROELIUM; Vol. 7 (2017): Proelium N.º 12, Janeiro - Junho; 227-241; 1645-8826
Idioma:: Portuguese
Relación:: https://revistas.rcaap.pt/proelium/article/view/11926/9088
Autor/Productor:: Fonte-Boa, Rui; Borges, José; Chaves, José
Editor:: Academia Militar
Derechos:: Direitos de Autor (c) 2017 PROELIUM
Fecha:: 2017-01-01
Tipo de recurso:: info:eu-repo/semantics/article; info:eu-repo/semantics/publishedVersion; Artigo Revisto por Pares
Formato:: application/pdf

oai_dc

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

< oai_dc:dc schemaLocation =" http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd " >
1. < dc:title lang =" pt-PT " > Analysis of External Ballistics for a Projectile of Caliber 155 MM </ dc:title >
2. < dc:creator > Fonte-Boa, Rui </ dc:creator >
3. < dc:creator > Borges, José </ dc:creator >
4. < dc:creator > Chaves, José </ dc:creator >
5. < dc:subject lang =" pt-PT " > Projectile </ dc:subject >
6. < dc:subject lang =" pt-PT " > angle of attack </ dc:subject >
7. < dc:subject lang =" pt-PT " > stability </ dc:subject >
8. < dc:subject lang =" pt-PT " > semispherical profile </ dc:subject >
9. < dc:subject lang =" pt-PT " > center of gravity </ dc:subject >
10. < dc:description lang =" pt-PT " > The objective of this thesis is to propose a geometry for a projectile to firefighting. The finite volume code STAR − CCM+® is used to calculate forces and moments acting on the projectile and a code is created in MATHEMATICA® to define the characteristics of the trajectory. The PRODAS® is used to verify and validate the models implemented. Initially, the procedure adopted was to create an entire methodology for an existing ammunition that would allow be verified and validated with the available literature. An extensive aerodynamic characterization has been done through CFD in order to establish the projectile forces and moments behavior and thus feed the further 6 DOF computation. It was concluded that the locking strap, the guiding strap and the Coriolis drift were negligible compared to the results obtained. The implementation of angle of attack came to influence the range and stability of the projectile. In the following phase six different geometries were tested, varying the lenght and the nose. Set up for this projectile an initial velocity of 100 m/s, 10 kg, concluding that the total length would be 697.1 mm and semispherical profile with the capacity to transport 7.5 dm3 inside. Wind tests were conducted to evaluate the stability in flight, and the software and analysis process developed in this work are available, being a contribution to the project FIREND. </ dc:description >
11. < dc:publisher lang =" pt-PT " > Academia Militar </ dc:publisher >
12. < dc:date > 2017-01-01 </ dc:date >
13. < dc:type > info:eu-repo/semantics/article </ dc:type >
14. < dc:type > info:eu-repo/semantics/publishedVersion </ dc:type >
15. < dc:type lang =" pt-PT " > Artigo Revisto por Pares </ dc:type >
16. < dc:format > application/pdf </ dc:format >
17. < dc:identifier > https://revistas.rcaap.pt/proelium/article/view/11926 </ dc:identifier >
18. < dc:source lang =" pt-PT " > PROELIUM; Vol. 7 (2017): Proelium N.º 12, Janeiro - Junho; 227-241 </ dc:source >
19. < dc:source > 1645-8826 </ dc:source >
20. < dc:language > por </ dc:language >
21. < dc:relation > https://revistas.rcaap.pt/proelium/article/view/11926/9088 </ dc:relation >
22. < dc:rights lang =" pt-PT " > Direitos de Autor (c) 2017 PROELIUM </ dc:rights >
</ oai_dc:dc >

marcxml

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

< record schemaLocation =" http://www.loc.gov/MARC21/slim http://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd " >
1. < leader > nmb a2200000Iu 4500 </ leader >
2. < controlfield tag =" 008 " > "170101 2017 eng " </ controlfield >
3. < datafield ind1 =" # " ind2 =" # " tag =" 022 " >
  1. < subfield code =" $a " > 1645-8826 </ subfield >
  </ datafield >
4. < datafield ind1 =" " ind2 =" " tag =" 042 " >
  1. < subfield code =" a " > dc </ subfield >
  </ datafield >
5. < datafield ind1 =" 0 " ind2 =" 0 " tag =" 245 " >
  1. < subfield code =" a " > Analysis of External Ballistics for a Projectile of Caliber 155 MM </ subfield >
  </ datafield >
6. < datafield ind1 =" 1 " ind2 =" " tag =" 720 " >
  1. < subfield code =" a " > Fonte-Boa, Rui </ subfield >
  2. < subfield code =" u " > CINAMIL - Centro de Investigação da Academia Militar </ subfield >
  </ datafield >
7. < datafield ind1 =" 1 " ind2 =" " tag =" 720 " >
  1. < subfield code =" a " > Borges, José </ subfield >
  2. < subfield code =" u " > CINAMIL - Centro de Investigação da Academia Militar </ subfield >
  </ datafield >
8. < datafield ind1 =" 1 " ind2 =" " tag =" 720 " >
  1. < subfield code =" a " > Chaves, José </ subfield >
  </ datafield >
9. < datafield ind1 =" " ind2 =" " tag =" 520 " >
  1. < subfield code =" a " > The objective of this thesis is to propose a geometry for a projectile to firefighting. The finite volume code STAR − CCM+® is used to calculate forces and moments acting on the projectile and a code is created in MATHEMATICA® to define the characteristics of the trajectory. The PRODAS® is used to verify and validate the models implemented. Initially, the procedure adopted was to create an entire methodology for an existing ammunition that would allow be verified and validated with the available literature. An extensive aerodynamic characterization has been done through CFD in order to establish the projectile forces and moments behavior and thus feed the further 6 DOF computation. It was concluded that the locking strap, the guiding strap and the Coriolis drift were negligible compared to the results obtained. The implementation of angle of attack came to influence the range and stability of the projectile. In the following phase six different geometries were tested, varying the lenght and the nose. Set up for this projectile an initial velocity of 100 m/s, 10 kg, concluding that the total length would be 697.1 mm and semispherical profile with the capacity to transport 7.5 dm3 inside. Wind tests were conducted to evaluate the stability in flight, and the software and analysis process developed in this work are available, being a contribution to the project FIREND. </ subfield >
  </ datafield >
10. < datafield ind1 =" " ind2 =" " tag =" 260 " >
  1. < subfield code =" b " > Academia Militar </ subfield >
  </ datafield >
11. < dataField ind1 =" " ind2 =" " tag =" 260 " >
  1. < subfield code =" c " > 2017-03-27 00:00:00 </ subfield >
  </ dataField >
12. < datafield ind1 =" " ind2 =" " tag =" 856 " >
  1. < subfield code =" q " > application/pdf </ subfield >
  </ datafield >
13. < datafield ind1 =" 4 " ind2 =" 0 " tag =" 856 " >
  1. < subfield code =" u " > https://revistas.rcaap.pt/proelium/article/view/11926 </ subfield >
  </ datafield >
14. < datafield ind1 =" 0 " ind2 =" " tag =" 786 " >
  1. < subfield code =" n " > PROELIUM; Vol. 7 (2017): Proelium N.º 12, Janeiro - Junho </ subfield >
  </ datafield >
15. < datafield ind1 =" " ind2 =" " tag =" 546 " >
  1. < subfield code =" a " > por </ subfield >
  </ datafield >
16. < datafield ind1 =" " ind2 =" " tag =" 540 " >
  1. < subfield code =" a " > ##submission.copyrightStatement## </ subfield >
  </ datafield >
</ record >

oai_marc

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

< oai_marc catForm =" u " encLvl =" 3 " level =" m " status =" c " type =" a " schemaLocation =" http://www.openarchives.org/OAI/1.1/oai_marc http://www.openarchives.org/OAI/1.1/oai_marc.xsd " >
1. < fixfield id =" 008 " > "170101 2017 eng " </ fixfield >
2. < varfield i1 =" # " i2 =" # " id =" 022 " >
  1. < subfield label =" $a " > 1645-8826 </ subfield >
  </ varfield >
3. < varfield i1 =" " i2 =" " id =" 042 " >
  1. < subfield label =" a " > dc </ subfield >
  </ varfield >
4. < varfield i1 =" 0 " i2 =" 0 " id =" 245 " >
  1. < subfield label =" a " > Analysis of External Ballistics for a Projectile of Caliber 155 MM </ subfield >
  </ varfield >
5. < varfield i1 =" 1 " i2 =" " id =" 720 " >
  1. < subfield label =" a " > Fonte-Boa, Rui </ subfield >
  2. < subfield label =" u " > CINAMIL - Centro de Investigação da Academia Militar </ subfield >
  </ varfield >
6. < varfield i1 =" 1 " i2 =" " id =" 720 " >
  1. < subfield label =" a " > Borges, José </ subfield >
  2. < subfield label =" u " > CINAMIL - Centro de Investigação da Academia Militar </ subfield >
  </ varfield >
7. < varfield i1 =" 1 " i2 =" " id =" 720 " >
  1. < subfield label =" a " > Chaves, José </ subfield >
  </ varfield >
8. < varfield i1 =" " i2 =" " id =" 520 " >
  1. < subfield label =" a " > The objective of this thesis is to propose a geometry for a projectile to firefighting. The finite volume code STAR − CCM+® is used to calculate forces and moments acting on the projectile and a code is created in MATHEMATICA® to define the characteristics of the trajectory. The PRODAS® is used to verify and validate the models implemented. Initially, the procedure adopted was to create an entire methodology for an existing ammunition that would allow be verified and validated with the available literature. An extensive aerodynamic characterization has been done through CFD in order to establish the projectile forces and moments behavior and thus feed the further 6 DOF computation. It was concluded that the locking strap, the guiding strap and the Coriolis drift were negligible compared to the results obtained. The implementation of angle of attack came to influence the range and stability of the projectile. In the following phase six different geometries were tested, varying the lenght and the nose. Set up for this projectile an initial velocity of 100 m/s, 10 kg, concluding that the total length would be 697.1 mm and semispherical profile with the capacity to transport 7.5 dm3 inside. Wind tests were conducted to evaluate the stability in flight, and the software and analysis process developed in this work are available, being a contribution to the project FIREND. </ subfield >
  </ varfield >
9. < varfield i1 =" " i2 =" " id =" 260 " >
  1. < subfield label =" b " > Academia Militar </ subfield >
  </ varfield >
10. < varfield i1 =" " i2 =" " id =" 260 " >
  1. < subfield label =" c " > 2017-03-27 00:00:00 </ subfield >
  </ varfield >
11. < varfield i1 =" " i2 =" " id =" 856 " >
  1. < subfield label =" q " > application/pdf </ subfield >
  </ varfield >
12. < varfield i1 =" 4 " i2 =" 0 " id =" 856 " >
  1. < subfield label =" u " > https://revistas.rcaap.pt/proelium/article/view/11926 </ subfield >
  </ varfield >
13. < varfield i1 =" 0 " i2 =" " id =" 786 " >
  1. < subfield label =" n " > PROELIUM; Vol. 7 (2017): Proelium N.º 12, Janeiro - Junho </ subfield >
  </ varfield >
14. < varfield i1 =" " i2 =" " id =" 546 " >
  1. < subfield label =" a " > por </ subfield >
  </ varfield >
15. < varfield i1 =" " i2 =" " id =" 540 " >
  1. < subfield label =" a " > ##submission.copyrightStatement## </ subfield >
  </ varfield >
</ oai_marc >

oai_openaire_jats

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

< article article-type =" research-article " dtd-version =" 1.1d3 " lang =" pt " >
1. < front >
  1. < journal-meta >
    1. < journal-id journal-id-type =" ojs " > proelium </ journal-id >
    2. < journal-title-group >
      1. < journal-title lang =" pt " > PROELIUM </ journal-title >
      2. < abbrev-journal-title lang =" pt " > PROELIUM </ abbrev-journal-title >
      </ journal-title-group >
    3. < issn pub-type =" ppub " > 1645-8826 </ issn >
    4. < publisher >
      1. < publisher-name > Academia Militar </ publisher-name >
      </ publisher >
    </ journal-meta >
  2. < article-meta >
    1. < article-id pub-id-type =" publisher-id " > 11926 </ article-id >
    2. < article-categories >
      1. < subj-group subj-group-type =" heading " lang =" pt_PT " >
        
        < subject > Artigos </ subject >
        
        </ subj-group >
      </ article-categories >
    3. < title-group >
      1. < article-title lang =" pt " > Analysis of External Ballistics for a Projectile of Caliber 155 MM </ article-title >
      </ title-group >
    4. < contrib-group content-type =" author " >
      1. < contrib >
        
        < name name-style =" western " >
        
        < surname > Fonte-Boa </ surname >
        
        < given-names > Rui </ given-names >
        
        </ name >
        
        < xref ref-type =" aff " rid =" aff-1 " />
        
        </ contrib >
      2. < contrib >
        
        < name name-style =" western " >
        
        < surname > Borges </ surname >
        
        < given-names > José </ given-names >
        
        </ name >
        
        < xref ref-type =" aff " rid =" aff-1 " />
        
        </ contrib >
      3. < contrib >
        
        < name name-style =" western " >
        
        < surname > Chaves </ surname >
        
        < given-names > José </ given-names >
        
        </ name >
        
        </ contrib >
      </ contrib-group >
    5. < aff id =" aff-1 " >
      1. < institution content-type =" orgname " > CINAMIL - Centro de Investigação da Academia Militar </ institution >
      </ aff >
    6. < pub-date date-type =" pub " publication-format =" epub " >
      1. < day > 01 </ day >
      2. < month > 01 </ month >
      3. < year > 2017 </ year >
      </ pub-date >
    7. < volume > 7 </ volume >
    8. < fpage > 227 </ fpage >
    9. < lpage > 241 </ lpage >
    10. < permissions >
      1. < copyright-statement > Direitos de Autor (c) 2017 PROELIUM </ copyright-statement >
      2. < copyright-year > 2017 </ copyright-year >
      3. < copyright-holder > PROELIUM </ copyright-holder >
      4. < ali:free_to_read />
      </ permissions >
    11. < self-uri href =" https://revistas.rcaap.pt/proelium/article/view/11926 " />
    12. < self-uri content-type =" application/pdf " href =" https://revistas.rcaap.pt/proelium/article/download/11926/9088 " />
    13. < kwd-group lang =" pt " >
      1. < kwd > Projectile </ kwd >
      2. < kwd > angle of attack </ kwd >
      3. < kwd > stability </ kwd >
      4. < kwd > semispherical profile </ kwd >
      5. < kwd > center of gravity </ kwd >
      </ kwd-group >
    14. < abstract lang =" pt " >
      1. < p > The objective of this thesis is to propose a geometry for a projectile to firefighting. The finite volume code STAR − CCM+® is used to calculate forces and moments acting on the projectile and a code is created in MATHEMATICA® to define the characteristics of the trajectory. The PRODAS® is used to verify and validate the models implemented. Initially, the procedure adopted was to create an entire methodology for an existing ammunition that would allow be verified and validated with the available literature. An extensive aerodynamic characterization has been done through CFD in order to establish the projectile forces and moments behavior and thus feed the further 6 DOF computation. It was concluded that the locking strap, the guiding strap and the Coriolis drift were negligible compared to the results obtained. The implementation of angle of attack came to influence the range and stability of the projectile. In the following phase six different geometries were tested, varying the lenght and the nose. Set up for this projectile an initial velocity of 100 m/s, 10 kg, concluding that the total length would be 697.1 mm and semispherical profile with the capacity to transport 7.5 dm3 inside. Wind tests were conducted to evaluate the stability in flight, and the software and analysis process developed in this work are available, being a contribution to the project FIREND. </ p >
      </ abstract >
    15. < counts >
      1. < page-count count =" 15 " />
      </ counts >
    16. < custom-meta-group >
      1. < custom-meta specific-use =" access-right " >
        
        < meta-name > open access </ meta-name >
        
        < meta-value > http://purl.org/coar/access_right/c_abf2 </ meta-value >
        
        </ custom-meta >
      2. < custom-meta specific-use =" resource-type " >
        
        < meta-name > journal article </ meta-name >
        
        < meta-value > http://purl.org/coar/resource_type/c_6501 </ meta-value >
        
        </ custom-meta >
      </ custom-meta-group >
    </ article-meta >
  </ front >
</ article >